xiehe model

The CNC processing plant mainly refers to the use of digital information recorded on the media to control the machine tool, so that it can automatically perform the specified processing tasks. So do you know the processing flow of the cnc processing plant? Next, the cnc processing factory will briefly introduce the processing process for you.

1. Product analysis through product analysis, certain composition information and some specific processing requirements should be obtained.

2. Graphic design Graphic design should first be based on a detailed analysis of the product. For example, for stamp processing, we need to determine the font, text size, and stamp type by analyzing the processing requirements.

3. Process planning through the analysis of the appearance and processing requirements of the workpiece product in the early stage, each processing step is reasonably established from the overall situation of processing.

4. Path generation the process of path generation is actually that we realize the process planning through software, and at the same time optimize the tool path through parameter settings.

5. After the path simulation path is generated, we generally have no intuitive feeling for its final performance on the machine tool. Here we can check possible problems through path simulation, thereby reducing the scrap rate of actual processing. The general inspection focuses on the effect of the appearance of the workpiece, whether it is over-cut or under-cut, and whether the process planning of the path is reasonable.

6. Path output is a necessary step for software design and programming to be implemented on the machine tool. Through path output, an intermediate reference can be used to establish a connection between the two. If students have a professional background in numerical control, they can also understand it as post-processing of tool paths.

Generally, the upper and lower sides of the workpiece are processed, and in special cases, the workpiece is processed on three, four, five or six sides. During the processing, we will keep the product (workpiece) with glue in the surrounding basket, fix the product (workpiece) with the side basket puller, and pour plaster to position the product (workpiece). During processing, the product (workpiece) and CNC There will be no adhesion on the work surface, which can better ensure that the processed product (workpiece) will not be deformed and the material level of the product (workpiece) will be accurate.

The above is the process of cnc processing, I hope it will be helpful to everyone. If you want to know more information about cnc processing, please call Xiehe cnc processing factory, we will do our best to serve you.