xiehe model

No matter what kind of rapid prototype is made, rapid prototyping technology is required. The model produced by this technology is exquisite and beautiful in appearance, and the curved surface design has a sense of streamlines. With the improvement of the accuracy of the user's rapid prototype production, especially when it comes to the matching parts. Therefore, there are many things that need to be paid attention to in the production of prototypes. Next, the Xiehe prototype manufacturer will briefly introduce the precautions in the process of making the prototype.

(1) For the formulation of the prototype process route, it can be divided into two processes according to the needs of the workpiece. First process the inner wall of the appearance of the prototype, mill the datum, and then turn it over 180. Clamping, processing the outer surface and the position of the button screen. If the outer surface is processed first, and then the inner wall is processed, it is difficult to position and clamp for secondary processing.

(2) If the wall thickness of the prototype is only 1.5mm, it is easy to deform and break when processing the outer surface. If there is a filler added to the processed cavity for support. This avoids the need to machine through holes for filling with plaster, otherwise it would be difficult to separate the finished product from the filling.

(3) Repair the trimmed curved surface first, cover the position of the through hole on the inner surface, process the whole surface, and then dig grooves to complete the through hole processing, so as to avoid the unsmooth cutting tool path when processing the through hole and the cutting force unevenness etc.

(4) Remember! The reference angle must be milled out first, so as not to cause the operator to adjust the wrong direction when flipping and clamping.

(5) Note: During the production process, the cutting must be simulated first, and after the inspection is correct, post-processing and CNC machining should be carried out.

The above content is the content of precautions in the process of rapid prototype production introduced by the Xiehe rapid prototype manufacturer. I hope it can be helpful to everyone. If you want to know more about Xiehe prototype, please call the Xiehe prototype manufacturer, we will serve you wholeheartedly.