xiehe model

In the processing industry, batch parts processing can best reflect the processing advantages. One is efficiency, because processing batch parts first can save time, and the improvement of efficiency can reduce a lot of costs. Most importantly save time. Generally speaking, the three-axis machining efficiency of batch parts is relatively low. First, it requires multiple clamps. If the part has four sides, the entire workpiece needs to be machined six times.

Not to mention processing efficiency. In terms of clamping, it took a lot of time and required more machines to distribute the machining of multiple surfaces. If you encounter a side that is not easy to process, you need to make jigs to assist in processing, which is too costly and not ideal in efficiency. However, five-axis simultaneous machining solves many problems. First, in terms of efficiency, the first setup for five-axis machining is less laborious.

Multi-face machining can be completed with only one clamping. This improves efficiency and reduces NC field clamping. It also reduces the time and cost of a lot of fixture-assisted processing. Generally, a three-axis machine tool needs to be clamped six times to process a finished workpiece. Five-axis machine tools basically only need two clampings to complete the entire workpiece. It also reduces the time and cost of a lot of fixture-assisted processing.

Generally, a three-axis machine tool needs to be clamped six times to process a finished workpiece. Five-axis machine tools basically only need two clampings to complete the entire workpiece.

It also reduces the time and cost of a lot of fixture-assisted processing. Generally, a three-axis machine tool needs to be clamped six times to process a finished workpiece. The machine tool basically only needs two clampings to complete the entire workpiece.

Therefore, five-axis cnc machining has great advantages in efficiency, followed by quality. To ensure the quality of batch parts, the first and most important thing is to ensure quality. Because if there is a quality problem, the entire batch of workpieces will be repaired or even scrapped. Therefore, before improving efficiency, we must first ensure quality. Three-axis machining of multilateral batch parts requires more clamping times, so there will be some errors when machining the sides, such as poor connection or machining failure.

Sometimes it is necessary to outsource electric discharge to complete the machining, regardless of the cost and expense, the quality will also be lacking, but when the five-axis machining encounters some complex surfaces, the angle of the workpiece can be changed to provide the best cutting environment for the tool. Since there is no need to disassemble the workpiece for alignment and centering, errors are greatly reduced when machining sides. In many complex structures that three-axis cannot process, five-axis can also process according to changing angles, which not only reduces the cost, but also ensures the quality of the workpiece.