xiehe model

Recently, many people have asked how to deal with the chaotic knife phenomenon in the tool magazine of the machining center. Next, the editor of Xiehe CNC processing factory will briefly introduce the treatment method of the chaotic knife in the tool magazine of the machining center.

The processing method for the disordered tool in the tool magazine of the machining center:

1) Check to see if the counter switch is loose, if there is any knife jamming, if there is a simple mess.

2) Check your signal for clamping and unclamping, tool holder up and down, and spindle position.

3) If there is a high-level low conversion function, also check the high-level low signal. When an alarm (give an alarm) occurs, see which signal does not arrive or is caused by a flash [shǎn shuò] in the T diagram. Another possibility is that the T-map is not authorized.

4) If this machining center is used by others, ask them if they have adjusted the phase sequence of the forward and reverse motor of the tool magazine without permission. If so, the tool magazine can only rotate in one direction, so it cannot be approached Looking for a knife, the knife magazine will be in chaos.

The above four points are the solutions to the chaos of the tool library of the machining center. I hope it can be helpful to everyone. If you want to know more about the cnc processing factory, please call the Xiehe cnc processing factory manufacturer. We will do our best to help you Serve.