xiehe model

Impeller processing belongs to curved surface processing and requires five-axis equipment. Five-axis machine tools can process some curved surfaces that three-axis machine tools cannot process; they can also process blades and even add writing. Next, the editor will give you a brief introduction to five-axis machining of impellers.

Five-axis machining of impeller Mastercam five-axis programming grounded gameplay:

⑴The cutter axis automatically avoids

When using Mastercam for five-axis programming, the forward and side tilt angles of the cutter axis can be automatically adjusted, and the cutter axis can be automatically tilted where collisions may occur according to the specified tolerance to avoid collisions; after cutting the collision area, the cutter axis is automatically adjusted to The original angle avoids collision between the tool and the workpiece.

⑵Control the cutting point of the tool

The control of the cutting point of the tool can ensure the contact between the cutting point of the tool and the surface of the part, avoiding cutting traps without changing any parameters. Mastercam can adjust the feed speed in designated areas, designated connections, or between area connections, ultimately allowing the tool to cut the workpiece more smoothly.

⑶ Optimize tool path point distribution

Optimizing the distribution of tool path points can control the number of tool nodes on each tool path. Combined with the excellent big data processing capabilities of advanced machine tools, we can increase the number of tool nodes in the tool path and control the distribution of tool nodes.