xiehe model

The five-axis linkage CNC machine tool is a machine tool with high technological content and high precision specially used for processing complex curved surfaces. This machine tool system is very important for a country's aviation, aerospace, military, scientific research, precision equipment, high-precision medical equipment and other industries. Has a decisive influence. It provides an important means for the development of new technologies, new products and modern industrial production, and is an indispensable strategic industry. Even developed industrialized countries all attach great importance to it. Five-axis linkage CNC machining has a very high error rate during the machining process, which will directly affect this technology to a certain extent. The machining center is not as unfamiliar as it was in the early days of imported processing. If something goes wrong, not only do you have to spend money to hire experts for maintenance, but it also delays production. But now there is some technical support, so generally there will be specific handling methods for failures. So why do failures occur during use? Next, let me briefly introduce it to you.

1. In the processing technology industry, we always have some things that are difficult to solve. They are usually equipment failures. Most of these are caused by damaged travel switches, or open circuits, short circuits, and no signal sources in the travel switch circuits. etc.

2. The limit stopper cannot press the switch contact to the action position, or the PLC input point is burned out.

3. The travel switch contact is pressed and stuck.

So if we encounter these problems in the process of using the machining center, how should we solve them?

During use, we need to check whether there is a short circuit in the travel switch circuit. If there is a short circuit, reprocess it. Check the signal source. At the same time, adjust the installation position of the travel switch so that the switch contact can be pressed normally to the action position.

Replace the input points on the I/O board, set parameters, and modify the PLC program.

Manually or handwheel shake away from the safe position, or clean the switch contacts.

In summary, the above is the editor's preliminary understanding of this product. If you want to know more, please call us at Xiehe CNC Processing.