xiehe model

CNC lathe is a high-precision, high-efficiency automated machine tool equipped with a multi-station turret or powered turret. The machine tool has a wide range of processing capabilities and plays a good economic role in the mass production of complex parts. During the operation, the operator must pay attention to the basic specifications and usage conditions of CNC lathe operations. Next, Xiehe Machining Factory will briefly introduce to you the operating specifications of CNC lathe processing.

Operating specifications for CNC lathes:

To reduce operating accidents of CNC equipment, we should not only prevent them from management, technology, training, supervision and inspection, etc., but based on years of experience in CNC and numerous case studies, we have summarized the following CNC machine tool operating accident prevention procedures, which can prevent operating accidents Prevention plays a positive guiding role:

1) CNC equipment must be operated by a specific person and a specific machine. You are not allowed to operate the equipment without obtaining qualifications.

2) When two or more people operate the equipment, they must negotiate and hand over the workpieces. It is strictly prohibited to change the status of the equipment without the consent of the operators.

3) Operators should continuously strengthen business learning and continuously improve their sense of responsibility.

4) The procedure must be carefully checked before the first piece is processed, and automatic processing can only be carried out after a single-stage processing test.

5) Programs and data must be strictly inspected after modification and executed according to the first-piece processing steps.

6) The selection of coordinate origin and tool change point in programming must be safe and foolproof.

7) Reasonably select cutting parameters, such as rotation speed, cutting amount, feed amount, etc., to prevent overloading of equipment.

8) Strictly inspect the workpiece blank. If the shape of the blank is too large (or too small), it must be processed in advance.

9) Workpieces and props must be clamped in a reasonable manner and location, and the clamping force must be adjusted appropriately.

10) The tool holder clamping must be firm and reliable.

11) Care must be taken during operation to prevent collisions when manually moving the machine tool.

12) If there is an abnormality in the equipment or a crash occurs, the maintenance personnel must be notified immediately to check the condition of the equipment, and no delay is allowed.

13) It is strictly prohibited to adjust and modify machine tool parameters without professional training and approval.

14) Seriously follow the operating instructions to maintain the equipment on time every day, and truthfully fill in the equipment inspection form.

The above content is the operating specifications for CNC lathe processing. I hope it can be helpful to everyone. If you want to know more about CNC processing factory, please call Xiehe processing factory, we will wholeheartedly introduce it to you one by one.