xiehe model

There are differences in the appearance and structure of the prototype model when polished. If the appearance is not very special, there will not be much difference in the finished product when the surface layer is processed. When sanding, you can use some coarser sandpaper for simple sanding, remove some of the thicker burrs on it, and then perform more detailed sanding. When products have different requirements for the surface layer, the degree of polishing treatment can be different. After the polishing is completed, spray some putty on it. The advantage of this is that it can make the original roughness of the surface of the product more obvious, and you can see the problems of the product more clearly. In this way, the correction will not be too blind and will be carried out in a targeted manner until all polishing processes of the product are completed. So do you know what the function of rapid prototype polishing is? Next, Xiehe Prototype Processing Manufacturer will give you a brief introduction.

The grinding process has three main functions:

1. Enhance the adhesion of the coating: Before spraying a new paint film, the old paint film layer after drying is usually polished, so there will be phenomena such as smooth surface transition and poor adhesion. Therefore, polishing can enhance the adhesion of the coating. Mechanical adhesion.

2. Substrate: For the substrate, the main purpose is to remove burrs, oil, dust, etc. on the surface of the substrate.

3. Scrape the putty surface: Generally, the surface is rough and needs to be sanded to obtain a smoother surface. Therefore, sanding can reduce the roughness of the workpiece surface.

Polishing the opponent board model is definitely not a redundant task. It can effectively clean the impurities on the base material. In addition, if some materials have been scraped with putty, most of the surfaces will be rough. After polishing, It can make its surface smoother and reduce the roughness of the workpiece; moreover, the polished material can make the coating better adhere to it.

When producing prototype products, the prototype model must be polished. After a certain part is processed by a machine, it is difficult to avoid some burrs or marks on it. When dealing with such problems, it needs to be solved manually. Generally, polishing paste is used for polishing, and sandpaper is also used for polishing. In this process, the effect of polishing can also be checked by spraying ash.

The above content is the function of rapid prototype polishing, I hope it can be helpful to everyone. If you want to know more about prototype processing, please call Xiehe Prototype Processing Factory, we will serve you wholeheartedly.