xiehe model

China has entered the industrial age 3.0, as well as the high-speed development of information age, the arrival of the 5 g make product obsolescence more accelerated, rapid prototype can make the products more earlier to let customers see real hand is essential in the process of product development and non-standard parts processing of a link, also more and more widely, more and more practitioners, a lot of people know that you need to do to rapid prototype. But do not know when the rapid prototype processing should pay attention to what? In order to improve the efficiency of rapid prototype processing to save time and cost, today I will give you a list of 10 points in the rapid prototype process should pay attention to:

1. Rapid prototype processing can be prepared in advance to prevent indiscretion in haste, affecting the processing quality and cycle; First of all, need to review the drawing, advance communication may not be in place, or change the process processing;

2. Before processing, we should communicate well, sign the processing agreement sheet, and properly arrange the processing date; Estimated processing time, and process coordination time issues;

3. Before spraying, we should consider whether the paint thickness is different from the processing size required by the drawing;

4. Rapid prototype processing to consider rough processing and finishing allowance, to prevent cracking and internal and external different heart, product appearance processing texture;

5. The correct selection of materials before rapid prototype processing, the structure of the rapid prototype in the high temperature and low temperature changes, manual help structure personnel to modify;

6. The transparent hand plate shall be made according to the materials required in the drawings, and the inner wall shall be smooth without the cutting lines processed by machine tools; Acrylic is without any grain, PC material can be slightly relaxed conditions;

7. Rapid prototype processing shall meet the roughness standard according to the requirements of the design drawings;

8. The forming process and working procedure should be set up before the design of rapid prototype processing, and the design should not be changed in the middle of the process because the parts are difficult to process;

9. In the rapid prototype processing according to the design of the required color together;

10. After the processing of the rapid prototype structure personnel measurement and assembly, design problems will be modified by structural personnel, and then through the review to re-processing, to avoid the same design problems.

Not long ago, a Beijing company in charge of the rapid prototype Mr. Song through the online information to find the Xiehe rapid prototype model factory, after our careful introduction and video chat, finally chose our Xiehe rapid prototype model factory to cooperate, has been passed over the data, will soon be able to complete the sample of the rapid prototype. It is very important to choose a good rapid prototype model factory, even if it is far away from the manufacturer.