xiehe model

The requirements of cnc processing are very high, and there will be very big mistakes if you don't pay attention. Therefore, the editor of the CNC processing plant below will briefly introduce what needs to be paid attention to when processing the CNC processing plant.

Problems that should be paid attention to in CNC processing plant processing technology:

(1) Determine the processing content of the CNC machining center, determine the machining base surface, installation base surface, machining allowance, etc. of the workpiece, and arrange the processing procedures for the purpose of giving full play to the efficiency of the CNC machining center.

(2) For complex parts, due to various reasons such as thermal deformation during processing, internal stress after quenching, and deformation after parts are pressed, it is difficult to complete the entire process after one clamping. Two or more clamping can be considered.

(3) When arranging the processing procedures, the principle should be from rough to fine. Therefore, heavy cutting and rough machining should be arranged first, and the machining allowance on the blank should be removed, and then the content requiring higher machining accuracy should be arranged, and gradually increase.

(4) The large flow cooling method is used to reduce the impact of the huge heat generated during the processing process on the machining accuracy. Therefore, in order to improve the durability of the tool, it is necessary to actively adopt a large flow cooling method.

The above are the things that need to be paid attention to when the cnc processing plant processes the process, and I hope it will be helpful to everyone. If you want to know more about cnc processing, please call Xiehe cnc processing factory, we will serve you wholeheartedly.