xiehe model

CNC lathe is a high-precision, high-efficiency automatic machine tool, equipped with multi-station turret or power turret, the machine tool has a wide range of processing performance, and has played a good economic effect in the mass production of complex parts. During the operation, the operator must pay attention to the basic specifications and conditions of use of the CNC lathe. Next, the CNC processing factory will briefly introduce the operating specifications of CNC lathe processing.

Operation specification of CNC lathe:

To reduce the operation accidents of CNC equipment, we should not only prevent them from management, technology, training, supervision and inspection, etc., but also summarize the following procedures for preventing operation accidents of CNC machine tools based on years of experience in CNC machine tools and numerous case studies, which can prevent operational accidents Prevention plays a positive guiding role:

1) Numerical control equipment shall be operated by fixed personnel and fixed machine, and the equipment shall not be operated before obtaining the qualification.

2) When two or more personnel operate the equipment, they must negotiate and hand over the workpiece. It is strictly forbidden to change the status of the equipment without the consent of the operators.

3) Operators should continuously strengthen professional learning and continuously improve their sense of responsibility.

4) The program must be carefully checked before the first piece is processed, and automatic processing can only be carried out after a single-stage processing test.

5) The program and data must be strictly checked after modification, and executed according to the first piece processing steps.

6) The selection of coordinate origin and tool change point in programming must be safe and secure.

7) Reasonable selection of cutting parameters, such as speed, cutting amount, feed rate, etc., to prevent overloading of equipment.

8) Strictly check the workpiece blank, and those whose shape is too large (or too small) must be pre-treated.

9) The necessary way and position of the workpiece and props to be clamped are reasonable, and the clamping force is properly adjusted.

10) The clamping of the tool handle must be firm and reliable.

11) Care must be taken during operation to prevent collisions when manually moving the machine tool.

12) In the event of equipment abnormality or car crash, the maintenance personnel must be notified immediately to check the condition of the equipment without concealment or delay.

13) It is strictly forbidden to adjust and modify machine parameters without professional training and approval.

14) Seriously and practically follow the operating instructions to maintain the equipment on time every day, and fill in the equipment inspection form truthfully.

The above content is the operation specification of CNC lathe processing, and I hope it can be helpful to everyone. If you want to know more about the cnc processing factory, please call Xiehe cnc processing factory, we will wholeheartedly introduce you one by one.