xiehe model

There may be some relatively small problems that need to be improved during the processing of many parts, so professionals are needed to correct and deal with these details to reduce the occurrence of problems. For customers, try to choose five-axis machining of aviation parts with good supply services. to meet demand. So what are the precautions for five-axis machining of aviation parts? Next, let the editor of Xiehe processing manufacturer give you a brief introduction.

What are the precautions for five-axis machining of aviation parts:

1. Be careful not to apply any pressure on the spindle

Because the operator will put all the pressure on the shaft-centered spindle during production, but it must be careful not to apply all the pressure when performing five-axis machining of aerospace parts, because this is likely to cause the spindle to be under constant pressure. The change of shape under the display of the product is very likely to cause the entire shape to shift during the settlement of subsequent products, resulting in unsatisfied user needs.

2. Pay attention to choosing the tools at hand for processing and manufacturing

Because the processing workers have a relatively comfortable type of processing tools when processing, so the five-axis machining of aviation parts must pay attention to the use of convenient tools for manufacturing, so as to ensure that the effect of product manufacturing can also better improve processing At the same time, the production and use of tools can also better increase the status of five-axis manufacturing.

3. Pay attention to ensure that the speed of each part is the same during processing

Because the quality of the trial product will be continuously improved during processing, when performing five-axis machining of aviation parts, attention should be paid to ensure that the parts to be processed have the same speed, so that the quality of each part can be stabilized in the same range without too much happening. Large fluctuations, at the same time, if the mass shift occurs, the cause can be quickly found and the speed can be adjusted better.