xiehe model

How to improve the finish of CNC machining of auto parts? At present, large-scale CNC machining has become an indispensable and important processing method in the processing of auto parts.

When machining large-scale auto parts cnc, you may encounter various problems, such as the pattern and smoothness of the workpiece. So what is the reason for the low finish? Today, Xiehe manufacturers will give you a detailed introduction on how to improve:

Auto parts CNC machining finish method:

1. In the CNC machining project, try to avoid the high-speed vibration of the spindle, because the vibration during the machining process will greatly affect the finish of the workpiece.

2. The chip removal slot for cnc machining should be properly opened to avoid poor chip removal, which may cause scratches on the workpiece and affect the smoothness of the workpiece.

3. If the CNC machining center is placed unevenly, it will cause vibration and affect the finish of the workpiece. Therefore, the stability of the CNC machining center must be guaranteed in order to better improve the finish of the CNC machining of auto parts.

4. Before CNC machining, the spindle speed and feed speed of the lathe must be matched.

5. The chip removal groove of CNC machining should be well opened, and try to avoid scratching the workpiece due to poor chip removal, which will affect the smoothness of the workpiece.

CNC machining centers are widely used in the current machining market, and the future development trend is also very good. It can be said that most of them are related to cnc processing. Especially in the auto parts industry, most of the products are passed. For example, bumpers, dashboards, door shafts, drive shafts, gears, gearboxes, wheels, brake drums, etc., small parts are processed by CNC first, and then glued.