xiehe model

Do you know the random tool inspection method of the machining center? Next, the manufacturer of Xiehe CNC processing factory will give you a brief introduction.

The processing method for the chaotic knife in the tool magazine of the machining center:

1) Check to see if the counter switch is loose and if there is any knife jamming, assuming that it is easy to mess up the knife.

2) Check your signal for clamping and unclamping, tool holder up and down, and spindle position.

3) Assuming there is a high level low conversion function, also check the high level low signal. When an alarm (give an alarm) occurs, see which signal does not arrive or flashes in the T diagram. Another possibility is that the authorized T-map is not rigorous.

4) Assuming that this machining center is used by others, ask them if they have adjusted the phase sequence of the forward and reverse motor of the tool magazine without permission. If so, the tool magazine can only rotate in one direction, so it cannot be approached Looking for a knife, the knife magazine is also in chaos.

The above content is the inspection method of the chaotic knife phenomenon in the machining center, and I hope it can be helpful to everyone. If you want to know more about cnc processing, please call Xiehe cnc processing factory, we will serve you wholeheartedly.