xiehe model

Five-axis machining is deeply loved and welcomed by the public, but in fact, most people don't know what five-axis machining is. Therefore, next, the Xiehe processing manufacturer will briefly introduce the common problems and solutions of five-axis machining.

5. What is the difference between a five-sided machining center and a five-axis machining center?

The pentahedron machining center refers to the use of a compound milling head. It also means that the milling head can be removed and installed, and the milling head can rotate the angle. That is to say, the surface other than the worktable is not easy to process, and the others are easy to process. Most of them refer to the gantry machining center. Only the compound milling head is used. Five-axis linkage means that it is like a general horizontal machining center with an additional axis. It means that the workbench has five moving directions.

6. How to operate the five-axis machining center? How to program?

It is not much different from ordinary four-axis machining centers, except that there is one more axis. And there are different forms of five-axis machining centers. The specific operation programming needs to be determined according to different machine tools.

7. What knowledge and skills are needed to learn five-axis machining centers?

1: The five-axis coordinate system, because the five-axis coordinate system is a relatively difficult subject in multi-axis machining, which involves a lot of tool interference issues, so it is more difficult. 2: Because it is a five-axis machine tool, the domestic machine tool system may not be so good, and most of them are imported. So you have to learn the course of mechanical foreign language. 3: Five-axis is multi-axis, and most of them are automatic programming, so you need to have a special understanding of software CAD..CAM,,.etc. Like UG, Por/E etc. 4: In terms of knives, does a good horse match a good saddle, so. Tool selection should be reasonable. 5: In terms of technology, the five-axis is quite different from the three-axis. The choice of process route is also different. Since the use of five axes is definitely more efficient than three axes.

The above are the common problems and solutions of five-axis machining, and I hope it will be helpful to everyone. If you want to know more about five-axis machining, please call the Xiehe processing manufacturer, and we will serve you wholeheartedly.