xiehe model

With the development of industrial technology, many products need to go through complex and precise operations during production. The staff of many manufacturers need to concentrate on the operation process and cannot miss any step. Post-modification is a more troublesome thing. Like impeller processing and production, its production process can be said to be relatively complicated in the entire industry, and some small parts must be fine, stable and so on. Once any problem occurs, it must be dealt with immediately. During the processing of the impeller, its processing procedure is also extremely complicated. Next, let the editor take everyone to get acquainted.

Process 1: It is necessary to adopt the clamping method of the three-jaw self-centering chuck to support the inlet flow channel of the impeller to realize the alignment by the inlet flow channel, and then first turn the large outer circle of the impeller, and then rough the inner hole, so to a certain extent The cutting speed is slower and the feed rate is smaller.

Process 2: This process uses special soft three-jaw clamping, usually to ensure the beating requirements of the outer diameter of the impeller inlet to the hole. Before processing, use three claws to clamp a cylinder to correct the inner hole and bottom surface of the clamping part of the soft claws. The diameter should be basically the same as the outer diameter of the impeller.

Step 3: Adopt a three-jaw clamping and positioning mechanism, in order to ensure that the flow channel of the impeller outlet is used as the processing benchmark. Under the action of the spring force, it can be guaranteed to be in contact with both sides of the impeller flow channel and can move up and down, so as to compensate for the error of the width dimension of the flow channel of the impeller water outlet during the casting process.

The above is all the content of the editor, I hope it will be helpful to you. If you have other related questions, please call Xiehe, we will do our best to serve you.