xiehe model

CNC machine tool is a relatively important equipment in our precision machining industry. It is mainly divided into several levels in the whole model. Five-axis machining is one of the more important types of CNC machine tools. It is generally used in the aerospace industry, aviation and military fields. It has a certain position in the market and has a certain influence. Many people don't know that the five-axis machine tool can not change the position of the workpiece on the machine tool, but it can process different sides of the workpiece, which can greatly improve the processing efficiency of prismatic parts to a certain extent. However, the difficulty coefficient of this processing technology is very high, because its technical content is relatively high and the processing precision is relatively large, it is generally difficult to operate. So many manufacturers will use the test knife as the basis to avoid mistakes in real processing. So what should we pay attention to in the process of testing knives?

1. In processing technology, when the tool moves to 30~50mm on the surface of the workpiece, what we need to do is to check its coordinates. Confirm that the residual axis of the coordinate axis and the coordinate values of the X and Y axes are synchronized with the mode while maintaining the feed.

2. When we are searching in the program, we should pay attention to whether the position pointed by the cursor is correct. Then we turn the target to the tool to observe whether the tool coordinates and the direction of movement of the machining center are correct.

3. When we are performing manual feeding and manual continuous feeding operations, to a certain extent, we need to check whether the positions selected by each switch are correct. Then find out the positive and negative directions according to its position. At the same time, press the button before operation.

4. During the trial cutting and processing of the machining center, when we change the tool, we must recheck it, especially the tool length. After ensuring that it is correct, we can modify the tool compensation value and tool compensation number.

To sum up, the above is my preliminary understanding of this product. If you want to know more, please call us for Xiehe Processing.