xiehe model

Maybe we don't have access to some more precise processing technologies in our lives, so we don't know much about some precision processing industries. Five-axis machining is a mode of CNC. It is a kind of high-tech and high-precision processing specially used for processing complex curved surfaces. It is mainly used in aviation, aerospace, military, scientific research, precision instruments, high-precision medical equipment, etc. industry, has a decisive influence to a certain extent. In the process of five-axis machining, the processing of many curved surface parts is very complex and very difficult to process. Generally speaking, if you want to perform better processing, the tools required are indispensable. For five-axis machining of impellers, solving impellers, blades, marine propellers, etc. is a more important step, and of course its automatic tool change mode is also included. So how to change the tool? Next, let me briefly introduce it to you.

1. To install the tool, we can first load the tool into the tool magazine, and then we place the tool in any tool holder. At this time, we must first write down the tool holder number where the tool is located. At the same time, we can also choose the fixed tool holder to install the tool. The tool is usually placed in the set tool holder.

2. Tool selection, sequential tool selection, mainly place the tools in the tool holder according to the order of the process. When using, take the tools one by one according to the order of placement, and put them back into the original tool holder after use. Or we can choose the tool at will, but we need to code each tool holder in the tool magazine, put the tools corresponding to the tool holder code into the designated tool holder one by one, and use the address T to indicate the tool holder code where the tool is located during programming.

3. Tool change. Under normal circumstances, the tools on the spindle and the tools to be replaced in the tool magazine are optional tool holders, and the tools to be replaced are fixed tool holders. Tool magazines are generally divided into three types, disc type, hat type and chain type. The number of tools required can be determined based on the process analysis results of the workpiece being processed. The capacity of the tool magazine is usually determined by the number of tools required for one part in one clamping.

In summary, the above is the editor’s preliminary understanding of this product. If you want to know more, please call our Xiehe processing manufacturer.