xiehe model

CNC machining factory mainly refers to using digital information recorded on the media to control the machine tool so that it can automatically perform specified processing tasks. So do you know the processing process of CNC processing factory? Next, Xiehe Processing Factory will briefly introduce the processing process to you.

1. Product analysis Through product analysis, certain composition information and some specific processing requirements should be obtained.

2. Graphic design Graphic design should first be based on detailed analysis of the product. For example, for seal processing, we must determine the font, text size, seal type, etc. by analyzing the processing requirements.

3. Process planning: Through the early analysis of the appearance and processing requirements of the workpiece product, each processing step is reasonably established from the overall processing perspective.

4. Path generation The process of path generation is actually that we implement process planning through software, and at the same time optimize the tool path through parameter settings.

5. After the path simulation path is generated, we generally have no intuitive feeling about its final performance on the machine tool. Here we can check possible problems through path simulation, thereby reducing the scrap rate in actual processing. The general inspection focuses on the appearance of the workpiece, whether it is over-cut or under-cut, and whether the process planning of the path is reasonable.

6. Path output Path output is a necessary step for software design and programming to be implemented on machine tools. Through path output, the connection between the two can be established through an intermediate reference. If students have a CNC professional background, they can also understand it as post-processing of tool paths.

Generally, the upper and lower sides of the workpiece are processed. In special cases, the workpiece is processed on three, four, five or six sides. During the processing, we will keep the glue around the edge basket of the product (workpiece), use the edge basket to fix the product (workpiece), and pour plaster to position the product (workpiece). During processing, the product (workpiece) and CNC There will be no adhesion on the work surface, which better ensures that the processed products (workpieces) will not deform and the material level of the products (workpieces) is accurate.

The above is the CNC processing process briefly introduced by Xiehe Processing Factory. I hope it will be helpful to everyone. If you want to know more about CNC processing, please call Xiehe Processing Factory, we will do our best to serve you.