xiehe model

The cnc processing plant is mainly used to produce parts. But many people don't know the problems that need to be paid attention to when using them in cnc processing plants, which leads to unnecessary losses. Therefore, next, the cnc processing plant manufacturer will briefly introduce the problems that should be paid attention to when the cnc processing plant is processing.

Problems that should be paid attention to when processing in cnc processing plants:

(1) Confirm the machining content of the CNC machining center, confirm the installation base surface, machining base surface, machining allowance, etc. of the workpiece, and organize the machining process with the intention of giving full play to the power of the CNC machining center.

(2) For messy parts, because of thermal deformation during processing, internal stress after quenching, and deformation of parts after being pressed, it is difficult to complete the entire process after one clamping. When you can consider two or more clamping.

(3) When organizing the processing procedures, the principle should be from rough to fine. First organize heavy cutting and rough machining, remove the machining allowance on the blank, and then organize the content that does not require high machining accuracy.

(4) Adopt a large flow cooling method. In order to reduce the influence of a large amount of heat generated during processing on the machining accuracy and improve tool durability, a large flow cooling method must be actively adopted.

The above four points are the problems that need to be paid attention to in the processing of cnc processing plants. I hope it will be helpful to everyone. If you want to know more about the cnc processing factory, please call the Xiehe cnc processing factory manufacturer, and we will do our best to serve you.