xiehe model

With the continuous updating of the technology era, five-axis technology processing is widely used in our industry. This technology is mainly for some compound processing of some key parts. The machine tools used are usually called five-axis machine tools. Generally used in aerospace, aviation and military fields. If we talk about the structure of this processing technology, then this technology actually has body parts, turbine parts and impellers with free-form surfaces. It can process different sides of the workpiece without changing the position of the workpiece on the machine tool. , can greatly improve the processing efficiency of prismatic parts. There are many types of it, among which the most representative ones are cradle type, vertical type, horizontal type, etc., and the role played in the process of processing is also very effective. The difficulty of five-axis machining technology is actually more difficult than we imagined, especially the programming. So what are the key points we should remember in programming? Next, let me give you a brief introduction.

1. Relative to the driving body, its attitude will change at any time during tool machining, and the roll angle can be specified. In general, it is more flexible than the vertical drive body and plays a certain role in the process of processing.

2. Keep away from the point. Generally, during the machining process, the operator will be in the closed area where it is applied. The attitude of the tool changes in two directions, and the attitude changes greatly. This method will have limitations.

3. Contour milling. Many people are curious about this. In fact, it is mainly used for milling inclined and straight walls. Using the known bottom surface, it can automatically find the inclined wall to be processed. Although it can't mill curved surfaces, it can use transformation to generate multiple tool paths.

4. According to the workpiece surface structure and processing requirements, cooperate with the model of the five-axis machine tool to avoid interference with the workpiece, optimize the tool posture, and reasonably generate the processing tool path.

To sum up, the above is my preliminary understanding of this product. If you want to know more, please call our Xiehe processing factory.