xiehe model

In the entire CNC machining industry, CNC machining center is one of our more important processing technologies and plays a very important role to a certain extent. It is mainly used for processing key mold parts such as mold cores and inserts, as well as copper pins. The quality of the mold core and inserts directly determines the quality of the mold forming part. We all know that five-axis linkage CNC machining is a machining center with relatively high technical content, difficult programming and high processing precision. However, we are still confident in the guarantee of CNC machining quality. These confidences generally come from the preparation stage before processing. In addition to technical aspects, he has rich processing experience and mold knowledge. We also need to pay more attention to the clamping matters during processing. So what should we pay attention to during the clamping process? Next, let me briefly introduce it to you.

1. Under normal circumstances, when we are doing clamping, we must pay attention to the position of the code and the appropriate extension length of the nuts and bolts on the pressure plate. At the same time, we must also pay attention to the fact that the screws cannot be pushed to the bottom when locking the corner.

2. In the process of processing precision, there are often many cases where one plate receives multiple pieces of copper material. At this time, we should check whether the direction is correct and whether the copper materials interfere with each other during processing.

3. During the processing, we can clamp the workpiece according to the shape of the program sheet and the workpiece size data, but we should pay attention to the fact that the workpiece size data is written as XxYxZ.

4. Cleaning is something that must be done every day. The workbench and the bottom of the workpiece should be cleaned before putting the workpiece on the machine. In addition, the machine tool table and workpiece surface should be pushed away with a whetstone to remove burrs and damaged areas.

5. Before using a vise for clamping, we must first understand the processing depth of the tool to prevent the clamped position from being too long or too short.

In summary, the above is the editor’s preliminary understanding of this product. If you want to know more, please call our Xiehe CNC processing manufacturer.